An acrylic sports court is a hard court whose playing surface is built up from layers of acrylic coating applied over a concrete (or asphalt) base. It is the standard surface you see on outdoor basketball, tennis, futsal, badminton and multipurpose courts across Malaysia — and it is very different from a bare concrete slab or a slab that has simply been painted with ordinary paint.
This guide explains what an acrylic court surfacing system actually is, how the layers work, which sports it suits, and how it compares to bare concrete and ordinary paint — so you can decide what is right for your project.
About Bina Duracourt: a Malaysian-made acrylic sports court coating system. Bina supplies and installs (supply & install) the surfacing through approved applicators, with a track record of 600+ courts nationwide and SIRIM Eco-Label certification.
What “acrylic sports court” actually means
When people say “acrylic court”, they are not talking about a single coat of paint. They mean a multi-layer surfacing system engineered specifically for play:
- It is water-based acrylic — durable, UV-stable and made for outdoor Malaysian weather.
- It is applied as a system of layers, not one coat, so it bonds to the concrete and builds a consistent playing surface.
- It produces a matt, non-skid finish that gives players grip, even when the surface is damp.
So “acrylic court paint” is really shorthand for the whole coating system: a sealer, a base coat, and the acrylic colour coats on top, finished with line markings.
How an acrylic court surfacing system works
A proper sports court is not just “paint on concrete” — it is a layered system built up over a cured concrete slab:
- Bina Sealer Exterior Premium — the primer/sealer that promotes adhesion and seals the pores of the concrete (coverage ~6 m²/L).
- Primacourt base coat — the hard-wearing intermediate layer; solids content 50 ± 3% by volume, dry film thickness 100–120 µm, applied in 2–3 coats (~8 m²/L).
- Bina Duracourt acrylic colour coats — the finished playing surface: a water-based 1-component acrylic, solids content 65 ± 2% by weight, a matt, non-skid finish, coverage 0.2–0.4 L/m² per coat, applied in 2 coats.
- Line marking — the game lines, applied to the standard of the chosen sport.
The concrete must cure for ≥ 28 days before coating begins. Each coat is touch-dry in about 1 hour, with recoating after roughly 4 hours — depending on weather conditions.
📄 Full technical specifications: Sports Court Specifications & Datasheet · Duracourt System.
What sports an acrylic court suits
One acrylic surfacing system works across most hard-court sports — the difference is in the dimensions, colours and line markings:
- Futsal court — a tough, high-grip surface for fast direction changes.
- Basketball court — weather-resistant for outdoor courts, with grip for pivots and stops.
- Badminton court — a flat, consistent surface with accurate lines to standard.
- Multipurpose court — one surface for several sports, with multi-sport line markings.
- Tennis — the classic acrylic hard-court application, indoor or outdoor.
See all options on the Bina Duracourt Acrylic Sports Court System page, or the BM hub at Cat Gelanggang Sukan.
Acrylic vs concrete vs ordinary paint
The clearest way to understand an acrylic court is to compare it against the two cheaper shortcuts: leaving the slab as bare concrete, or coating it with ordinary paint.
| Factor | Bare concrete | Ordinary paint on concrete | Acrylic system (Bina Duracourt) |
|---|---|---|---|
| Grip | Slippery when wet or dusty | Often slick; little texture | Matt, non-skid — safe even when damp |
| Weather resistance | Stains, cracks, holds water | Fades and peels under UV & rain | UV-, heat- and rain-resistant |
| Player comfort | Hard, glaring, uneven | Hard, inconsistent | Matt, consistent playing surface |
| Maintenance | Hard to clean, no protection | Peels and needs frequent repainting | Easy to wash; can be recoated |
| Appearance | Grey, industrial | Dull, patchy over time | Bright, clean, professional colours |
| Lifespan | Surface degrades, no play layer | Short — not built for foot traffic | Built for play; lasts years with care |
Bare concrete gives you no grip and no protection. Ordinary paint may look fine for a season, but it is not engineered for foot traffic, ball impact or Malaysian sun — it fades and peels. An acrylic court surfacing system is purpose-built for play: grip, weather resistance, comfort and a professional finish that lasts.
Colour options
Bina Duracourt is available in four colours: Green, Red, Blue and White. Common combinations:
- Two contrasting colours — one inside the field of play, one for the outside (run-off) area. Popular pairings: green (out) + red (in), or blue + green.
- Crisp white lines that stay visible and last, marked to the chosen sport’s standard.
Contrast is not just for looks — it helps players and referees see the playing boundaries clearly.
Maintenance & when to resurface
A correctly installed acrylic surface lasts several years, depending on usage and weather. To extend its life:
- Wash regularly to remove dust, moss and dirt.
- Avoid sharp footwear or objects that can scratch the surface.
- Inspect the lines and colour each year.
Signs a court needs resurfacing: faded colour, a surface that has gone slippery, or lost lines. Recoating over a sound base is far more economical than rebuilding. See why courts fade and turn slippery, and how to fix it.
Why choose Bina Duracourt
- A manufacturer, not a reseller — you deal directly with the factory that makes the coating.
- SIRIM Eco-Label — verified on quality and environmental impact.
- 600+ courts completed across Malaysia.
- Supply & install through approved applicators — materials and installation handled.
Frequently Asked Questions (FAQ)
What is an acrylic sports court? It is a hard court whose playing surface is built from layers of water-based acrylic coating over a concrete base — a sealer, a base coat and acrylic colour coats, finished with line markings. It gives a durable, non-skid, coloured surface for futsal, basketball, badminton, tennis and multipurpose courts.
What is acrylic court paint? “Acrylic court paint” is shorthand for the whole surfacing system, not a single coat. With Bina that means Bina Sealer Exterior Premium, the Primacourt base coat, and Bina Duracourt acrylic colour coats applied on top.
How is an acrylic court different from concrete? Bare concrete is slippery, glaring and unprotected. An acrylic system adds a non-skid, UV- and weather-resistant playing surface in proper court colours, with grip and comfort that bare concrete cannot provide.
How many coats does an acrylic court need? The Bina Duracourt system uses a sealer, a Primacourt base coat (2–3 coats), then 2 coats of Duracourt acrylic (coverage 0.2–0.4 L/m² per coat), plus line marking.
Is an acrylic court suitable for outdoor use? Yes. Duracourt is built to resist UV, heat and rain, making it well suited to outdoor courts in Malaysia’s climate.
Does Bina install acrylic sports courts? Yes. Bina supplies and installs the acrylic surfacing system through approved applicators, nationwide.
Want a sports court that lasts?
Tell us the type and location of your court — the Bina team will help you choose the right system and colours, complete with supply and installation.
👉 Get a Quote (WhatsApp) · See the Bina Duracourt system →
Bina Paint — Malaysian manufacturer of sports court coatings since 2005, SIRIM Eco-Label certified, 600+ courts nationwide.
