Epoxy & PU floor systems, engineered for industry.
From a dust-free warehouse coating to a seamless, hygienic food-factory floor — Bina is the Malaysian manufacturer that makes the primer, mortar and topcoat and installs the finished system.
The Bina 5-layer floor system — primer to topcoat
Tell us where it goes — we’ll build the system
Pick your application and see the recommended Bina layer build-up, from primer to topcoat.
A mix-and-match build-up using real Bina floor products. Final spec is confirmed to your slab and use.
Why this build
High abrasion from forklifts and pallet traffic. A primed epoxy coating gives a hard, dust-free, easy-clean floor; add the epoxy mortar where impact is severe. Line-marking defines safe traffic lanes.
Spec this floor →A mix-and-match build-up using real Bina floor products. Final spec is confirmed to your slab and use.
Why this build
A seamless floor that handles machinery, trolleys and spills. Pick the epoxy topcoat for chemical and abrasion duty, or PU 7600 where colour-stability and a non-skid finish matter.
Spec this floor →A mix-and-match build-up using real Bina floor products. Final spec is confirmed to your slab and use.
Why this build
Hygienic, seamless and easily sanitised. Bina specifies PU 7600 for food, pharmaceutical and bottling floors — it is non-skid, steam-clean compatible and colour-stable. Coving at wall junctions completes the hygienic detail.
Spec this floor →A mix-and-match build-up using real Bina floor products. Final spec is confirmed to your slab and use.
Why this build
Decks need abrasion resistance, slip safety on ramps and UV colour-stability where exposed. PU 7600 stays colour-stable outdoors; bay and directional line-marking organise traffic flow.
Spec this floor →A mix-and-match build-up using real Bina floor products. Final spec is confirmed to your slab and use.
Why this build
A tough, attractive, easy-clean floor. High-gloss EF 6200 for a showroom finish; scratch-resistant PU 7600 where tools and tyres are hard on the surface.
Spec this floor →A mix-and-match build-up using real Bina floor products. Final spec is confirmed to your slab and use.
Why this build
Maximum chemical and impact resistance — an epoxy mortar build with a chemical-resistant epoxy finish. EF 6200 is rated for both immersion and non-immersion chemical service.
Spec this floor →Every layer, explained
Each part of the system has its own page with the real datasheet specs.
See exactly how a resin floor is built
An interactive 3D cross-section and the real datasheet specs for every layer.
The floor system, layer by layer
Explore the interactive 3D build-up — primer, mortar, scratch coat, self-levelling and topcoat — and click any layer for its real specs.
Explore the 3D system →Specs & downloads
Datasheets (TDS), substrate requirements and certifications for specifiers, contractors and tender submissions.
Open downloads →Real Bina floor projects across Malaysia
A few of the institutional & multipurpose-hall floors our applicators have delivered — seamless, line-marked and built to last.
One manufacturer, one accountable system
Most flooring is sold by a material brand and laid by a separate contractor. With Bina you get both — and that is what protects your floor.
Manufacturer + applicator
We make the primers, mortars and topcoats and install them — one party accountable for the whole floor, not a blame-game between supplier and contractor.
Real datasheets & SIRIM
Every layer has a published TDS and our products carry SIRIM / MyHIJAU certification — the documentation tenders and specifiers need.
A complete system
Primer → mortar → scratch coat → self-levelling → topcoat all come from one compatible range, engineered to bond together.
Built for Malaysian sites
Formulated and proven in local humidity, heat and heavy-industry conditions, with nationwide supply and approved-applicator workmanship.
Need a floor specified for your site?
Tell us the area, current floor and what it has to handle — we’ll recommend the right build-up and quote supply & installation in one package.