Heavy-duty epoxy mortar screed flooring.
Bina Gard EM6304 is a three-component, solvent-free epoxy mortar laid 3–10 mm thick — a tough, impact-resistant body and moisture barrier for the heaviest industrial traffic, then sealed with a topcoat.
The heavy-duty body of the floor
Typical applications
Warehouses
Forklift- and impact-resistant build for the heaviest traffic.
Chemical plants
Tough, chemical-resistant body under a sealed topcoat.
Manufacturing
Levels and rebuilds worn slabs into a durable surface.
Real datasheet figures
From the Bina Gard EM6304 datasheet.
| Type | Solvent-free, silica-filled 3-component epoxy mortar |
|---|---|
| Colour | Natural |
| Mixing ratio (A:B:C) | 4 : 1 : 20–40 by weight |
| Pot life (28°C) | 45 minutes |
| Thickness | 3 – 10 mm |
| Pack size | 25 kg / set |
| Substrate | Min 25 N/mm² compressive · ≥1.5 N/mm² pull-off |
| Cure (30°C) | Light traffic 16 hr · full 48 hr · fully cured 7 days |
| Note | Not UV/colour-stable — must be top-coated |
Built and installed by the manufacturer
Heavy-duty build
3–10 mm of solvent-free epoxy mortar for impact and heavy traffic.
Moisture barrier
Designed to resist osmotic moisture from the slab below.
Seamless & hygienic
Once sealed with a topcoat, it cleans easily with no joints.
System-matched
Laid over Bina primer and finished with Bina scratch coat + topcoat.
Common questions
How thick is an epoxy mortar floor?
Bina Gard EM6304 is laid from 3 mm up to 10 mm depending on the traffic and how much the slab needs rebuilding.
Does it need a topcoat?
Yes — the mortar is not UV colour-stable on its own. It is sealed with a scratch coat and an epoxy or PU topcoat for the finished surface.
What slab does it need?
A sound concrete substrate of at least 25 N/mm² compressive and ≥1.5 N/mm² pull-off, mechanically prepared and primed first.
Where is it used?
Warehouses, chemical plants, manufacturing and car parks — anywhere the floor takes heavy impact, traffic or chemical load.
Related parts of the floor system
Sectors we build this floor for
Need a heavy-duty floor that takes a beating?
Tell us the traffic and condition of your slab — we’ll specify the mortar build and topcoat and quote it.