Polyurethane floor coating — UV-stable, non-skid, hygienic.
Bina PU 7600 is a two-component aliphatic polyurethane topcoat with a unique ceramic feel — colour-stable indoor and out, non-skid and steam-clean compatible. The go-to finish for food, pharma and exposed decks.
A hard, hygienic, colour-stable topcoat
Typical applications
Food & pharma
Hygienic, non-skid, steam-cleanable floors that sanitise easily.
Car parks & decks
UV colour-stable finish for exposed and outdoor areas.
Electronics
Non-dusting floors for clean production environments.
Real datasheet figures
From the Bina PU 7600 datasheet, including the chemical-resistance guide.
| Type | Two-component aliphatic polyurethane |
|---|---|
| Finish | Satin · low-gloss · non-skid · scratch-resistant |
| Colour | Refer to colour chart |
| Volume solids | 50 ± 2 % |
| DFT per coat | 50 microns · 1–2 coats |
| Theoretical coverage | 10 m²/L @50µm |
| Pot life | 4 hours |
| Drying | Touch 4–6 hr · recoat 24 hr |
| Pack size | 5 L & 20 L |
| Colour stability | Stable indoor & outdoor · steam-clean compatible |
Splash & spillage resistance — Bina PU 7600 datasheet. For continuous chemical immersion, ask us to specify the right system.
Built and installed by the manufacturer
UV colour-stable
Aliphatic PU holds its colour indoors and outdoors — unlike standard epoxy.
Non-skid & hygienic
Safe underfoot and easy to sanitise — ideal for food, pharma and wet areas.
Tough topcoat
High abrasion resistance and excellent flexibility over a properly designed system.
Manufacturer + applicator
Made and installed by Bina, with real datasheets and SIRIM/MyHIJAU.
Common questions
What makes PU 7600 different from epoxy?
It is aliphatic polyurethane, so it stays colour-stable under UV (epoxy can yellow), has a non-skid satin finish and is steam-clean compatible — ideal for hygienic and exposed areas.
Is it suitable for food factories?
Yes. Bina specifies PU 7600 for food and pharmaceutical floors — it is hygienic, easily sanitised and steam-clean compatible, typically over an epoxy mortar build with coving.
Can it go outdoors?
Yes — it is colour-stable indoor and outdoor, suitable for decks and exposed areas where epoxy alone would chalk or yellow.
How is it applied?
By roller, brush or spray over the recommended primer or as a topcoat over a self-levelling base. Touch-dry 4–6 hours, recoat 24 hours.
Related parts of the floor system
Sectors we build this floor for
Need a hygienic or UV-stable floor?
Tell us the area and environment — food, pharma, deck or workshop — and we’ll specify and quote the PU system.