Industrial flooring datasheets, specs & certifications.
Everything specifiers, contractors and tender teams need — technical data sheets, substrate requirements and certifications for the Bina industrial floor system. Documents are sent on request.
Datasheets by product
Request any datasheet (TDS) or safety data sheet (SDS) and our technical team will send it over for your submission.
| Bina Prime SF6303 | Clear epoxy primer Solvent-free, 100% solids, >2.0 MPa adhesion | Request TDS / SDS |
|---|---|---|
| Bina Gard EM6304 | Epoxy mortar / screed 3-component, 3–10 mm, heavy-duty | Request TDS / SDS |
| Bina Prime SC6305 | Epoxy scratch coat High-build 85% solids, pore-filler/level | Request TDS / SDS |
| Bina SL 6500 | Self-levelling epoxy Seamless self-smoothing body coat | Request TDS / SDS |
| Bina EF 6200 | Epoxy floor finish High-gloss, chemical/oil/abrasion, immersion-rated | Request TDS / SDS |
| Bina PU 7600 | Polyurethane topcoat Non-skid, UV-stable, hygienic, steam-cleanable | Request TDS / SDS |
Product codes shown are the current datasheet references. If you hold older Bina documents (e.g. SE100 / EM200 / SC300 / SL500), these are the same product family — confirm with our team.
What your slab needs
The numbers a specifier or contractor needs before work starts.
Compressive strength
Minimum concrete compressive strength for the floor system.
Pull-off strength
Minimum substrate tensile/pull-off (concrete failure) for reliable adhesion.
Concrete cure
Minimum cure for new concrete before priming; surface must be dry and clean.
Certified & compliant
Bina floor products carry recognised Malaysian certifications. Certificates are issued on request for tenders and submissions.
SIRIM
Malaysian standards certification for product quality and conformance.
MyHIJAU
Malaysia’s official green recognition for environmentally-preferable products.
Manufacturer + applicator
Bina Integrated Industries manufactures and installs — full documentation and accountability.
Need a document for your tender?
Tell us the products and documents you need — TDS, SDS, certificates or a method statement — and we’ll send them over.