Are you looking for waterproof paint here in Malaysia? Before buying this type of paint, there are many things that you should know.
In this article, you will be given the complete guide for your reference in making the right choice in waterproofing.
Let’s go.
What is Waterproofing?
With waterproofing, you can avoid any unnecessary inconvenience at your place.
Major problems like your property being damaged and mould growth due to water dripping into the surface of your ceiling could be encountered by you.
Waterproofing solves all of these issues and it usually lasts five to ten years.
Why Use Waterproofing Paint Malaysia?
Here are some of the facts about waterproofing paint that you might want to pay attention to.
It has the ability to protect structures and give them a boost to resist the harsh element of nature.
This type of paint is water resistant chemicals and its common constituents are latex, concrete based or oil.
It is also suitable for all kinds of surfaces from plastics, cement to wood.
Waterproofing is durable and in most cases, it lasts a lifetime no matter what kind of structure it is.
Types of Waterproof Paint
As you know by now, waterproof paint is made to keep your house or any structures protected from any common problems.
In this section, we are going to reveal the types of waterproof paint that you can choose from.
- Epoxy Paint
This paint is commonly used in industries such as construction, industrial, commercial and many more.
Compared to other floor paints, epoxy is 5 times thicker which also means that it is durable, waterproof, easy to clean up, permanent adhesion, and resistant.
It is also best to use this paint on hard surfaces like garage floor and concrete due its amazing ability to protect against hot-tire pick-up, automotive fluids and more.
- Acrolein Elasticized Paint
Surfaces which are made from concrete are ideal for this type of paint to be used.
You can expect this paint to prevent growth of mould, bacteria, and mildew.
However, there are things that you should be aware of regarding this paint.
Since it is made from toxic substances, it could cause damage to the lungs, throats and skin.
To make acrolein a waterproof paint, you will need to combine it with acrylic paint.
- Acrylic Paint
There are two types of acrylic paint: traditional acrylic and latest acrylic.
Traditional acrylic is dry faster compared to the latest acrylic. This is because the latest paint is made by Golden and Chroma.
Acrylic is mainly used for home decorating where you can see the use of it on beautiful paintings which can last for a long time.
Besides that, you can use acrylic on wood and glass decorating items but they need more surfaces like paper and glass.
No special tools are required and it can be used with rollers, brushes and spray. After it dries, it is waterproof.
Acrylic is available in matte, satin and gloss finishes.
- Masonry Paint
Made from latex and ceramic, masonry paint is mostly used for concrete or cinder blocks, cements, bricks, stones and hardie boards.
It is made for exterior use but you can also use inside the house but only on concrete floors.
Mansory makes surfaces waterproof, durable, resistant to dirt and well-protected to exterior walls.
You may use this paint on surfaces like vinyl, metal, wood, plastic and mansory.
Benefits of Waterproofing Paint
Here are several benefits of using waterproofing paint.
Firstly, it is specially designed to prevent moisture from entering home. You will face no issues and also it reduces costs for your maintenance and repairs.
Secondly, it can be used anywhere and any part of your place because regardless of the place, waterproofing paint is effective.
Thirdly, once this paint has been applied, it gives you enhanced hygiene, cost-effective coverage, cement strength and neat environment.
How to Apply Waterproofing Paint?
In this section, we are going to show you the steps of using waterproofing paint.
Step 1:
Making sure that any loose mortar is removed is the first thing you need to do.
Brush away any chunks of mortar that appear loose or crumbling by using stiff brush.
Place the hose attachment on the vacuum and go over the mortar lines. The suction from the vacuum will help remove smaller pieces that you may have missed.
Step 2:
This step is known as patching.
First thing, you need to mix small amounts of mortar and place it inside the pastry bag.
After that, cut off the tip and start filling the holes with mortar.
To accomplish the job, you are required to mix as much mortar as you need but do it in small batches so it does not dry out.
Remove the excess mortar with the trowel and allow the mortar to properly cure according to the package.
You can speed up the drying process by using a hairdryer.
Step 3:
Get rid of the moisture.
You need to know that moisture is your worst enemy when using the waterproof paint.
Make sure you have a dry surface for the paint to perform at its best.
Set up the dehumidifier and get it run for several days before the painting session as this will remove the moisture from the air and from the material to be painted.
If you want to apply the paint outside of the house, you should know that it requires a primer treatment.
Step 4:
This also the last step and this part is where you paint.
Use painters tape on the edges before you start to apply waterproof paint.
There are many ways you can apply waterproof painting like paint sprayer, paint roller, and paint brush.
What Paint to Use for Waterproofing?
To help you find the right waterproofing paint in Malaysia, we recommend Bina Paint’s Waterproofing Paint:
BINA MULTIPROOF 5000 is a high performance acrylic polymers for excellent flexible seamless waterproofing membrane system.
It is a water base simple compound cold applied as a protective layer for multi surfaces such as concrete, asbestos, metal, fiberglass, roof slab etc.
The function is not only for excellent waterproofing membrane but also acts as a heat reflector and resistance, long term concrete structure protection.
It also has decorative finish which comes in many colours that suits your needs.
Some of the features BINA MULTIPROOF 5000
- Flexible Waterproof System
- Protective Layer
- Decorative Finish
- Suitable for most surfaces
BINA SEAL 1000 is formulated using flexible synthetic resins disposed with other polymeric micro compounds to penetrate into micro capillaries in concrete.
It can also be used as a surface thin layer repair mortar for concrete honeycomb.
Features
- Waterproof
- Micro Compound Going Into Micro Capillaries
- Suitable For Toilets
In conclusion, waterproofing paint has many benefits for you as a user. Its effectiveness, reliability and ability are the reasons why you should consider this option.
Established in 2005, Bina Integrated Industries Sdn Bhd has excelled in the waterproofing industry as a specialist contractor company for more than 20 years.
The company is based in the manufacturing district of Bandar Baru Bangi, Selangor.
They also have branch offices in Johor, Penang, Perak, Pahang, Kelantan, Negeri Sembilan, Melaka, Terengganu, Sabah, Kedah, and Sarawak to ensure that all projects are properly managed.
Bina Paint’s main business are their 3 major products Paint, Waterproofing and Sport Court.
For more information, do not hesitate to contact Bina Paint here.
You can also visit Bina Paint on Facebook to know about our latest updates.
